All-in One Water Cooling Corsair H115i: CPU Cooler in the Practice Test

The Corsair H115i is an all-in-one – water cooling for CPUs. In the practice test, we look at device, cooling capacity and volume.

  1. Corsair H115i: CPU cooler in the practice test
  2. Corsair H115i in the practice test: installation and Corsair link
  3. Corsair H115i in the practice test: cooling capacity and volume

It must be a full-blown water cooling for several hundred euros not equal if the CPU of the high-performance computer (after over clocking) sweat comes and gets hot. This proves the all-in-one – water cooling Corsair H115i, which is allowed only a few weak points in the practice test. We look at, how installation and Setup run, what does the radiator and how loud it is in operation.All-in One Water Cooling Corsair H115i CPU Cooler in the Practice Test

All-In-One – Water Cooling?

The Corsair H115i consists of a small pump with illuminated Corsair logo, which replaced the classic CPU heat sink to the motherboard. The pump is connected to two hoses with a 280 tire radiator. The team forms a closed loop, which requires no maintenance for long-term operation. The heat is carried by the pump via the coolant in the radiator, the two 140-fans (140 mm diagonal) for the purpose of cooling air supply. The cooled water flows over the other hose back to the CPU, to re-take heat to lead away from the processor. The advantage: The radiator can be located in its flat form easier in the housing install as a classic, chunky CPU cooler. When the Corsair H115i just think of the appropriate holes for the 280 tire radiator. Fractal design define R5 we previously tested offers corresponding holes on the ceiling, in the front, and even in the ground.
During installation, you have the choice either to blow cold air through the radiator into the case from the outside, or to outward transport already heated housing air through the radiator. Both situations are not ideal to realize due to the construction but not otherwise. In our practical test did no big difference with the CPU temperatures, direction in which the air moves. For other components in the system could heat up much sooner, if we blow through the radiator cold air, which can heat up quickly, in the Interior. We therefore recommend to hunt the already heated air through the radiator to the outside. This hardly dented the cooling performance of the all-in-one – water cooling. Then, it is important to ensure that the warm air in the case “stands”, and thus generally provides more heat for an ideal air circulation in the body.
The installation of an all-in in-one – water cooling provides more space in the housing in places, which usually are the worst sources of heat. In addition to the CPU that are above all the graphics card and depending on the housing construction also the power supply. The additional room for fresh air compensates the above shortcoming, as well as all all-in-one – water cooling systems have somewhat.
The installation of all-in-one – water cooling is fast and can be done even by a layman. Compared to typical CPU cooler designs, there is less stress with small parts and a lower risk because no heavy and bulky heat sink during installation can fall off and damage the other components. The radiator also has this risk, however, it is much faster and more easily mounted.
First, attach the radiator in an appropriate place in the housing and install the fan at the same time. Twice eight screws are needed overall. During a renovation, you should of course, remove the old CPU cooler and residues of old thermal paste from the processor surface. In this case, use a simple cloth with a little cleaning alcohol.
Recommended reading: PC upgrade – it must be sure
Now you need to install the pump. To do this you need the supplied back plate (back plate). This is made of plastic and looks in comparison to the rest of the system while some cheap, is completely sufficient for the pump. Finally, the Board must ensure no 1-kilogram heat sink. Use the correct distance screws depending on the socket and processor manufacturers according to the multi-language quick start guide. For Intel systems is mounted the right bracket at the pump already. Fix the pump with the supplied screw heads on the back plate that you have previously provided with the mentioned screw. You must not think of thermal paste which is already applied at the Corsair H115i.
Then, connect the 3-pin power cable (which already depends on the pump) to the appropriate connector on the motherboard (CPU fan). The supplied USB cable comes with a finish at the bottom of the pump and the other end to a free front-USB port on the motherboard. You need the USB cable for the control and monitoring software Corsair Link, which can be found on line as a download. Connect then, nor the fan of the radiator with the two connecting cables to the pump and to the conclusion nor the system itself via SATA power cable with the power supply.All-in One Water Cooling  Corsair H115i: CPU Cooler in the Practice Test 1

Corsair H115i in the Practice Test: Corsair Link

You need to download the software Corsair link, there is no disk in the package. After installation, it lists not only the temperature of the processor, but also that of the main board, graphics card and hard drive. Depending on what components you have connected cooler by Corsair, there is limited, but sufficient setting possibilities. When the CPU cooler to adjust the speed of the fan and the pump. To do this you can run the pump in the performance, or in silent mode. Alternatively, there’s a balance mode. Adjust the lighting of the Corsair lettering on the pump in the tool. We come to the important part – how well does cool the Corsair H115i?Our test system consists of an Intel Core i5 6600 K on an Asus Z170-A, which we once 4 x 3,5GHz and once each to keep over clocked up to 4 x 4.5 GHz default clock for several hours in Prime 95 . The program brings all CPU cores at full capacity and thus providing an enormous heat which must be dissipated and cooled. We use the so-called define R5, as housing the space and already at the factory offers a good air circulation.
With an air cooler (e.g. the Thermal right true spirit 140 power) tools like core TEMP or MSI Afterburner at the default clock of CPU indicate temperatures maximum 57 degrees for the 6600 K. When over clocked, we come to almost 70 degrees. This is for the processor while still not critical, harm in the long term, but of life – the life of the other components, which permanently get the warm air. The fan was doing no more than to hear a quiet purr.
The Corsair H115i showed a slight improvement in the maximum temperatures on “Quiet” by default and the CPU at default intervals. The CPU has been even hotter, more all-in-one – water cooling could come up trumps – it must take the user but also louder expectant noises in the performance mode to purchase. The 6600 K came on standard clock after several hours in Prime 95 on around 50 degrees in non-interactive mode. In performance mode, 5 degrees of less were once again in the average. However the fan with a hum noticeable more clearly then, and also the pump draws attention to be acoustically.
And when over clocked? In silent mode, the Corsair H115i brings the 6600 k under Prime 95 below 60 degrees Celsius. We can work the all-in-one – water cooling at high speed, the stop is maximum at very good 55 degrees. This makes it clear that the Corsair H115i also for higher Over clocking projects is suitable, and already the silent mode delivers very good work.All-in One Water Cooling  Corsair H115i: CPU Cooler in the Practice Test 2

Conclusion:

The Corsair H115i brings a very good cooling performance. Only a few high-end devices on air base bring CPUs to similarly low temperatures: and this brings the Corsair factory on the pump with the standard heat-conductive paste, mind you. Who needs a high-performance CPU cooler, can quite slamming at the Corsair H115i. Only the noises in the performance mode are likely to interfere with performance-oriented users with silent preferences. For this but can easily replace the all-in-one – water cooling standard fan with quieter devices. However, Even in silent mode is cooling performance very well! The bottom line is a very powerful radiator fluid-based, which is significantly cheaper than full-blown water cooling – and cool with not much worse.All-in One Water Cooling  Corsair H115i: CPU Cooler in the Practice Test 3

Gallery

Corsair H115i 104.7 CFM Liquid CPU Cooler (CW-9060027-WW …

Corsair H115i 104.7 CFM Liquid CPU Cooler (CW-9060027-WW ...

Source: pcpartpicker.com

Corsair H115i Pro (280mm AIO) Liquid Cooler Review …

Corsair H115i Pro (280mm AIO) Liquid Cooler Review ...

Source: www.kitguru.net

CORSAIR Hydro Series H115i Liquid CPU Cooler Review

CORSAIR Hydro Series H115i Liquid CPU Cooler Review

Source: www.nikktech.com

Corsair H115i Pro (280mm AIO) Liquid Cooler Review …

Corsair H115i Pro (280mm AIO) Liquid Cooler Review ...

Source: www.kitguru.net

CORSAIR Hydro Series H115i Liquid CPU Cooler Review

CORSAIR Hydro Series H115i Liquid CPU Cooler Review

Source: www.nikktech.com

Corsair H150i Pro (360mm AIO) Liquid Cooler Review …

Corsair H150i Pro (360mm AIO) Liquid Cooler Review ...

Source: www.kitguru.net

Corsair H115i Pro (280mm AIO) Liquid Cooler Review …

Corsair H115i Pro (280mm AIO) Liquid Cooler Review ...

Source: www.kitguru.net

Corsair H80i H100i Liquid CPU Coolers

Corsair H80i H100i Liquid CPU Coolers

Source: pc-internet-zone.blogspot.com

20 water coolers review: for better cooling

20 water coolers review: for better cooling

Source: us.hardware.info

CORSAIR Hydro Series H115i Liquid CPU Cooler Review

CORSAIR Hydro Series H115i Liquid CPU Cooler Review

Source: www.nikktech.com

CORSAIR Hydro Series H115i Liquid CPU Cooler Review

CORSAIR Hydro Series H115i Liquid CPU Cooler Review

Source: www.nikktech.com

CORSAIR Hydro H115i Pro Low Noise 280mm RGB Liquid CPU …

CORSAIR Hydro H115i Pro Low Noise 280mm RGB Liquid CPU ...

Source: www.nikktech.com

AMD Ryzen 5 & 7 CPU Cooler Round Up

AMD Ryzen 5 & 7 CPU Cooler Round Up

Source: www.overclock3d.net

Watercooling Kit Corsair H115i (Août 2016)

Watercooling Kit Corsair H115i (Août 2016)

Source: www.funnydog.tv

Corsair H115i Pro (280mm AIO) Liquid Cooler Review …

Corsair H115i Pro (280mm AIO) Liquid Cooler Review ...

Source: www.kitguru.net

CORSAIR Hydro H115i Pro Low Noise 280mm RGB Liquid CPU …

CORSAIR Hydro H115i Pro Low Noise 280mm RGB Liquid CPU ...

Source: www.nikktech.com

Kaby Lake 7700K 5GHz AIO Cooler Mega Test

Kaby Lake 7700K 5GHz AIO Cooler Mega Test

Source: www.overclock3d.net

CORSAIR Hydro Series H100i PRO Liquid CPU Cooler Review …

CORSAIR Hydro Series H100i PRO Liquid CPU Cooler Review ...

Source: www.legitreviews.com

Corsair’s H115i Pro and H150i Pro CPU coolers reviewed …

Corsair's H115i Pro and H150i Pro CPU coolers reviewed ...

Source: techreport.com

CORSAIR Hydro H115i Pro Low Noise 280mm RGB Liquid CPU …

CORSAIR Hydro H115i Pro Low Noise 280mm RGB Liquid CPU ...

Source: www.nikktech.com