How to Build RC Drift Car

Drift is a native of Japan motorsport. Drift cars are designed to lose traction in the rear wheels while turning so they slide on the road or track surface at an angle. A pilot must then turn the wheel hard right to go left, and vice versa. Drift racing remote control developed from a desire to experience the excitement of the sport without the risk of injury. RC drift cars are controlled like other RC cars, but are modified so that they are more willing to drift.Things You must.

1:10 baking car body paint
Dip Back Tank
Stickers Photo Frame Photos pipe, PVC ABS or
strip
See Instructions masking
The 1
Select a body style. At 1:10 body in a kind commonly used in the real drift racing works well.
2
Customize the body as desired. Use a paint tank dip and plunge the whole body of the car. Then, set it on a cooling rack or baking tray drying where it can get air circulation around for an even finish color. Add stickers and finishing detail painting. You can mimic the appearance of a professional drift car or follow your own design.
3
Select a frame. The best frame for RC Drift Racing are four-wheel drive. It has a weight distribution that is heavy on the front which derives easier.
4
Remove the tires and wheels of the chassis. These grip the road surface and will not drift.
5
Measuring the diameter and tire width. You will need about 6 inches of ABS or PVC pipe with the same diameter as the tires of the RC car.
6
Cut the pipe into four pieces of the same width as the tires that were removed. These are replacement tires for your chassis.
7
Drag the pipe-tires on the wheels on the car chassis. If they do not fit comfortably wrap the tape wheel and then put the tire back on. Continue the process until the tire on the wheel tightly defined.
8
Turn the wheels to the chassis. Make sure they are secure; you do not want your tires to break loose in a drift race.
9
Set the motor in position on the chassis. The engine must be fully electric. Nitro and gas engines do not work as well for RC Drift Racing. In addition, the lighter the engine is best for the handling of the car CR. Specialized derived engines are available, but a small electric motor can be adjusted to work.
10
Attach the frame finish on the main body of the car as instructed by the manufacturer of the body.