How to Make a Racetrack for RC Cars

For RC car enthusiasts, there is nothing better than a good old dirt road outside. It has the feeling of a real race track, especially when the dirt begins to fly off the track during a race at breakneck pace.It’s also a great way to get the whole neighborhood involved and find other people interested in the race and new friends who share your passion. Build a car track RC outdoors is an easy thing to do, and it ensures that you always have a place in the race – as long as the sun out.Things you need.

Dirt (optional)
2-by 4 pieces of wood
garden hose
Rake
See Instructions
The 1
Determine the location of your car RC track outdoors according to Necessaryhome. This may sound easy, but building in your garden might not work. You must dirt for traction and a large space. You should also areas outside of the track where riders can stand during a race.
2
Inspecting the surface of the zone. If you are picking a grassy area, you’ll need to add your own dirt to the surface. The performance of these cars on the grass for a prolonged period of time can damage the landing gear and stop cars to work. Try looking in the hilly areas, leaving cars make great leaps during the race.
3
Deciding on the general layout of your track. You can sketch a design of the track on a piece of paper if you do not have much space or if you are worried about setting the size and specific dimensions. An oval track is always an option, but you can also experiment and create more curves and turns, similar to a road course.
4
Lay down pieces of different sizes 2 -by-4 wood to fix the limits of the track. Some people also prefer to use hoses or other types of rolled materials. Remember that you need an external border and a border inside. The inner boundary shows where the middle of the track, while the outside shows where riders.
5
Use a rake to scratch the surface of your track and apply water with a garden hose. Basically, you want to scratch the dirt before you start, creating a pull for cars. Then apply enough water to wet the area without saturating it. This creates a smooth surface and also removes any remaining debris from the construction process.