The racing mass is ideal for correcting imperfections and leveling walls. Before applying paint, stickers and the wallpaper, the interesting thing is to prepare the wall, so that it is smooth. The staff at Viva Decora will teach you how to put pastry on the wall.
Choosing a quality racing dough is key to ensuring the success of the application. It is also necessary to identify whether the running mass is for internal or external environments, this detail is crucial to prevent the appearance of bubbles. The acrylic mass is ideal for external environments, since the mass of PVA must be applied in internal areas, without humidity.
How To Pass Dough Race On The Wall With Infiltration?
There is no way to pass dough on the wall that has infiltration, before it is necessary to prepare the wall. If the wall is peeling or damp, it is important that it is sanded and receives a waterproof coating.
The new walls that will receive the pasta race must be previously prepared with plaster or slab; it will also be necessary to sand the wall. How to pass dough on the wall is a new situation for some, so it’s worth following some safety and application rules.
Here’s How To Pass Dough On The Wall Using The Trowel.
Before you understand how to put dough on the wall, you need to know some instruments that will be used in the application. You will need 150 or 180 # sandpaper, mask, hand gloves, steel trowel, spatula, a damp cloth, brush or duster. There are no secrets of how to put dough on the wall, however, practice in the activity is critical to ensure a perfect finish.
Here’s How To Run Dough On The Wall With The Illustrated Step-By-Step:
Put some dough in the trowel and distribute it with even movements. The entire wall must be filled, it is not necessary to apply an absurd amount of dough. The amount must be necessary to cover small holes and imperfections.
If your wall has larger holes, you can make a homogeneous mass of plaster, glue and water, then mix the mass with a small amount of runner. Moisten the place that will receive the dough without soaking, and apply the dough to the hole. Wait to dry the place and proceed with the application of the dough on the wall.
After applying the dough, wait for the wall to dry for about 8 hours, check if there is still any imperfection and if necessary pass the dough one more time. Use the sandpaper to leave the finish very smooth, without undulations. For safety’s sake, there’s no way to put dough on the wall and smear it without gloves and mask.